LS ELECTRIC XGL-PSEA, User Manual

Page: 98 / 154

Chapter 5 Profibus-DP Communication
5-37
(7) Config. Upload
After “Setting of communication module and communication period” is complete, click the mouse cursor positioned on
High-speed link window (right screen of XG5000), and select “Online”

“Communication module setting”

“Config.
Upload (Dnet, Pnet)” to upload SyCon’s configuration file.
(8) Setting of High-speed link block
Double-click the applicable index number of Configuration file uploaded and designates the ‘Read area’ and
‘Save area’ of Send/Receive.
Setting of High-speed link block
Classification Details
Master
Station No.
Display the Master station no.
Station No. *1
Setting range for the slave : 0 ~ 126
If identical station No. is set, communication will not be normal.
Mode *1
Sending: Transmission the data from master module to slave module.
Receiving: Transmission the data from slave module to master module.
Read area
(Master module
→
Slave module)
XGK
Area to set the start address of device used for Sending.
Setting device : P, M, K, F, T, C, U, Z, L, N, D, R, ZR
XGI
Area to set the start address of device used for Sending.
Setting device : A, M, I, Q, R, W, F, K, L, N, U
Save area
(Slave module
→
Master module)
XGK
Area to set the start address of device used for Receiving.
Setting device : P, M, K, F, T, C, U, Z, L, N, D, R, ZR
XGI
Area to set the start address of device used for Receiving.
Setting device : A, M, I, Q, R, W, F, K, L, N, U
Send data
Receive data
(Byte)
Display input/output points of slave module by the bytes.
- In case of I/O module of 8 bits or less, please set 1 byte.
*1 : Area is not able to set
Setting of High-speed link block