LS ELECTRIC XGL-PSEA, User Manual

Page: 45 / 154

Chapter 4 Communication Programming
4-4
4.1.3 High-speed Link communication status flag information (XGT)
Communication Flag List corresponding to High-speed Link Number High-speed Link No.1~12.
No. Keyword Type Contents Contents Explanation
L000000 _HS1_RLINK Bit
All stations of High-
speed Link No.1 are
normal.
It indicates normal status of all stations which operate
according to parameter set in the High-speed Link.
If the following condition is met, It would be turned On.
1. All stations set in parameter are RUN mode and there is
no Error.
2. All data blocks set in parameter operate properly.
3. When parameter of each station in parameter
communicates normally, after Run_Link is On, Run_Link
maintains On contiuosly unless quitted by disable.
L000001 _HS1_LTRBL Bit
Indicates abnormal
After _HS1RLINK
ON
When _HSmRLINK Flag is On, if station set in parameter
and communication status is same as the followings, this flag
is turned On.
1. Station set in parameter is not RUN mode.
2. Station set in parameter has Error.
3. Communication status of data block set in parameter is
not proper.
If above condition is met, Link_Troble set On.
If condition is normal, Link_Troble set Off.
L000020
~
L00009F
_HS1_STATE[k]
(k=000~127) Bit
Array
Indicates High-
speed Parameter
No.1 Kth Block’s
total status
It indicates total status about each data block set in
parameter.
HS1STATE[k]=HS1MOD[k]&_HS1TRX[k]&(~_HSmERR[k])
L000100
~
L00017F
_HS1_MOD[k]
(k=000~127) Bit
Array
Run Mode of High-
speed Parameter
No.1 Kth Block
It indicates operation mode of station set in Kth block of
parameter.
L000180
~
L00025F
_HS1_TRX[k]
(k=000~127) Bit
Array
Indicates normal
Communication
status with High-
speed Parameter
No.1 Kth Block
It indicates whether communication status of parameter’s Kth
data block operates normally or not according to setting.
L000260
~
L00033F
_HS1_ERR[k]
(k=000~127) Bit
Array
Error Mode of High-
speed Parameter
No.1 Kth Block
It indicates whether communication status of parameter’s Kth
data block has error or not.
L000340
~
L00041F _HS1_SETBLO
CK[k]
Bit
Array
Indicates setting of
High-speed
Parameter No.1 Kth
Block
It indicates whether Kth data block of parameter is set or not.
* In case of Pnet, Kth block indicates slave’s station number.