CANopen Communication Module
4
2.3 Installing the CANopen Communication Module
1
Get the G100 CANopen communication module ready for installation. (A dedicated RJ-45
cable is attached to the module.)
2
Remove the front cover from the G100 inverter.
3
Connect the communication module to the G100 inverter using the RJ-45 network cable.
4
Hook up the communication module to the installation slot on the inverter.
5
Install the fixing bolt provided with the communication module using an appropriate tool.
6
The CANopen communication module has been installed on the G100 Inverter.
•
Do not install or remove the communication module to or from the G100 inverter while
the inverter is turned on.
•
Install or remove the communication module to or from the G100 inverter only after
the electric charge of the capacitor inside the inverter has been completely
discharged.
•
Ensure that the cable connection between the module and the inverter (dedicated RJ-
45 cable) is not loose or disconnected.
