Introduction
10
ProtoMat M60
2.0 Introduction
The LPKF
ProtoMat
M60 mill/drill unit is a circuit board plotter which can
be used to produce prototype PCBs and gravure films, and for engraving
aluminum or plastic.
Familiarity with the
BoardMaster
driver program of the LPKF
ProtoMat
M60 is essential for operation of the machine. Operation of the LPKF
ProtoMat
M60 is described in the LPKF
BoardMaster
Manual. The
exclusive operating interface for the LPKF
ProtoMat
M60 is controlled
from the serial port of a PC.
In order to make any guarantee claims, if necessary, it is absolutely vital
to follow the instructions of this manual before putting the machine into
operation. For machines exported to other countries of the European
Community the guarantee conditions of the corresponding country apply.
2.1 Characteristics of the ProtoMat M60
Voltage
200-240V (or 100-120V)
Power consumption
200VA
Speed of high-speedcycle
spindle max.
60000/min
Weight
ca. 25 kg
Drilling performance
max. 60 strokes/min
Resolution (smallest step)
0.0079375mm
Operating data:
Humidity
60% max.
Temperature:
15-25°C
