L-INX User Manual
30
LOYTEC
Version 4.0
LOYTEC electronics GmbH
Figure 9: Add LIOB devices to the LIOB-Connect bus.
2.
Select a L-IOB device in the tree on the left-hand side and enter names for the terminals
by double-clicking into the
Name
column as shown in Figure 10.
Figure 10: Change LIOB terminal names for your installation.
3.
Select a terminal and change the object parameters to configure this terminal. You can
multi-select terminals and change the parameters for all selected terminals.
Figure 11: Change LIOB parameters for the selected terminal(s).
4.
On the
Datapoints
tab the data points for the LIOB terminals have been created. These
data points can be used, e.g., in the logiCAD IEC61131 program. For terminal inputs
the data point L1_x_UIy_
Input_Read
will be used to read an input terminal and for
