L-INX User Manual
122
LOYTEC
Version 4.0
LOYTEC electronics GmbH
7.
Click
Next
in the following screens until you get to the final dialog shown in Figure 98.
8.
If the device is already on-net, select
Online
.
Figure 98: Final dialog.
9.
Click
Finish
. A dialog will prompt to press the service pin.
10.
Finally, you should get the device added to your drawing as depicted in Figure 99.
Channel FT-10
LNS Network Interface
linx
Figure 99: The L-INX has been added to the drawing.
6.4.7 Replace a L-INX in LNS
This Section describes how to replace a L-INX in your LNS database. The example
discusses a LINX-10X but is general to all CEA-709 L-INX models. The description refers
to LonMaker TE. Let‘s assume there is a device ‗linx‘ in the LNS database as shown in
Figure 100.
