Lowrance Link-2 User Manual Download

Page: 64 / 86

Lowrance - Link-2 Installation and Operation Instructions

Section 7 - Installation Instructions

7-1 Batteries and charger

The radio is shipped with a sealed Li-Polymer battery pack that is rechargeable.

WARNING

The charger provided for this radio is only to be used to charge the battery pack

provided.

Do not

charge any other type of batteries in the charger as fire, explosion

or battery damage could occur. Avoiding extreme room temperature will also help

prolong the life of the battery pack for the radio.

7-1-1 Installing the battery pack

1. Position the battery pack to line up the three external alignment tabs to the

alignment slots in the radio.

2. Engage the battery pack into the radio until battery pack is fully seated against the

radio housing.

3. Pivot the locking tab up until it snaps into place on the back of the battery pack.

7-1-2 Initial charge

You can either charge the Li-Polymer battery

pack when it is attached to the radio or separated:

Summary of Contents for Link-2























































































Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands

Lowrance Link-2, User Manual

Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands