Lowrance Link-2 User Manual Download

Page: 17 / 86

Lowrance - Link-2 Installation and Operation Instructions

3-6 Dual Watch operation

Dual watch monitors channel 16 while receiving another channel. To activate this, you

must:

1. Select the desired operating channel (e.g. CH88).

2. Push the SCAN key repeatedly until

appears on screen.

3. To cancel dual watch, press SCAN (once) until

disappears.

If a signal is received on channel 16, dual watch pauses on channel 16 until the signal

disappears.

To transmit on the selected channel during dual watch, press and hold PTT.

3-7 3CH operation (Favorite Channel)

You can instantly access the three most frequently used channels by 3CH mode, Three Fa-

vorite Channels. Press to toggle between your favorite channels. The , , or symbols

appear on the LCD to show which of your favorite channel is selected.

3-7-1 Add a favorite channel for the first time

1. Select the desired channel, then hold 3CH to store it. The CH1 symbol appears on

the screen.

2. Repeat the procedure to store two more favorite channels in the CH2 and CH3

locations.

3-7-2 Modify or delete favorite channel

If you try and add another favorite channel it will overwrite the existing CH3. But CH1 and

CH2 will remain unless you delete them.

To delete a favorite channel:

•

Select that channel, then hold down 3CH until a dialog box appears to prompt the

deletion.

Summary of Contents for Link-2























































































Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands

Lowrance Link-2, User Manual

Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands