Lowrance Link-2 User Manual Download

Page: 34 / 86

Lowrance - Link-2 Installation and Operation Instructions

4-7 Radio setup

The RADIO SETUP submenu is used to set up functions of the radio.

MENU SELECT

CONTRAST

▲

GPS/DATA

►

RADIO SETU

▼

4-7-1 Channel Bank selection (UIC)

Non-EU models only

You can select the: USA, International, or Canadian channel band. The channel bands are

listed in the appendix sections.

RADIO SETUP

►

UIC

CH NAME
RING VOLUM

▼

UIC

►

USA

INT

’

CANADA

1. Select RADIO SETUP, the cursor is at UIC, press ENTER.

2. The cursor is at USA. If you want to select the International channel band, move the

cursor to INT’L. If you want to select the Canadian channel band, move the cursor to

CANADA.

3. Press ENTER to confirm your choice.

4. The new channel band is selected. Depending on your choice, the USA, INT’L, or

CAN icon is shown on the screen.

4-7-2 Channel name editing (CH NAME)

To setup the channel name to ON or to blank the first line.

RADIO SETUP

UIC

►

CH NAME

RING VOLUM

▼

CH NAME

CALLING

►

EDIT

DELETE

1. Select RADIO SETUP, then CH NAME and press ENTER.

2. Select the desired channel name by using the CH / . Press ENTER then the screen

will show the channel name, EDIT and DELETE (Maximum of 12 characters).

3. Select EDIT and press ENTER to edit the existing name tag. Input the new name over

the existing one and press ENTER to display the YES/NO confirmation.

Summary of Contents for Link-2























































































Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands

Lowrance Link-2, User Manual

Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands