Lowrance Link-2 User Manual Download

Page: 61 / 86

Lowrance - Link-2 Installation and Operation Instructions

3. Press and hold down the DISTRESS key for about 3 seconds, until you see the

distress call sending message (DISTRESS CALL SENDING) on the screen. The whole

display starts to flash and beep loudly.

4. After the Distress Call is sent, the radio waits for an acknowledgment.

•

The Distress call is automatically transmitted every 3.5 to 4.5 minutes, until an

acknowledgement is received (“Call repeat” mode).

•

Press

◄ / ►

to display the transmitted Distress call information.

5. You now have the following options: RESEND, PAUSE, CANCEL:

6. To RESEND the call, press

RESEND

softkey to enter “HOLD DISTRESS 3 SECONDS

TO SEND” screen. Hold down DISTRESS key for 3s to resend the call or press

EXIT

softkey to return to waiting for an acknowledgement call.

7. To PAUSE the call, press

PAUSE

softkey to pause the “Call repeat” mode, press

EXIT

softkey to resume the same call.

8. To CANCEL the call, press

CANCEL

softkey to enter “DISTRESS CALL SEND CANCEL”

screen.

•

Press

softkey to return to waiting for an acknowledgement call.

•

Press

YES

softkey to send the DISTRESS CANCEL call. Then press PTT to report your

situation using the handset mic, after the report, press EXIT to return to the normal

operating mode.

9. After receiving the acknowledgment, press

SILENC

softkey then reply using the

microphone, or press EXIT key to quit the current distress acknowledgment.

Note:

Prior to receiving an acknowledgement, the distress alert call cannot immediately

be terminated by you, it can only be cancelled by completing the distress call cancel

process as described above (step 8).

Summary of Contents for Link-2























































































Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands

Lowrance Link-2, User Manual

Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands