Lowrance Link-2 User Manual Download

Page: 58 / 86

Lowrance - Link-2 Installation and Operation Instructions

5-15 Receiving an Individual Call (INDIV)

INDIVIDUAL
ROUTINE FROM
123456789

►

00:01

123456789
NO AUTO SW
CH06 REQUEST

◄ ►

00:11

When you receive notification of an INDIV call, press

SILENC

softkey to silence the

alert. INDIV calls are almost always routine priority. If the radio recognises the user

MMSI as one of your buddies, the buddy’s name is displayed in place of the user MMSI.

2. Press / keys to scroll any further information about the call, or press EXIT to

return the current DSC receive process.

3. You have the following options to respond the call:

•

ABLE

softkey respond to the call with requested channel

•

NEW-CH

softkey respond to the call with but request a different channel

•

UNABLE

softkey respond to the call with unable to use the requested channel

(

Note:

this option is not available with ROUTINE calls)

4. If the display shows “AUTO SWITCH”, the radio will automatically respond to the call

after 10s if no user intervention. For “AUTO SW OFF”, a manual responce is required -

for “INDIV REPLY” options, see section 4-8-3.

5. The caller should respond to your acknowledgement by making voice contact

designated channel. If this does not happen, you can press PTT to initiate voice

contact instead.

The call data is stored in your Call Log (see section 5-7).

5-16 Receiving a Group Call (GROUP)

GP: SAM
CALL FROM
123456789

▼

00:01

123456789
CHANGE TO
CH06

◄ ►

00:11

1. When you receive notification of a GROUP call, press

SILENC

softkey to silence the

alert. Press / keys to scroll any further information about the call.
The priority level is always routine, and the group is identified on the screen. The

group will be one of the 20 groups of frequently called people that you set up earlier

(see section 4-8-2).

2. Press

ACCEPT

softkey to switch to the designated channel immediately, or press

EXIT to return the current DSC receive process.

3. If the display shows “AUTO SWITCH”, the radio will automatically switch to the

Summary of Contents for Link-2























































































Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands

Lowrance Link-2, User Manual

Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands