manualshive.com logo in svg

Lowrance Link-2, User Manual

Share
Download
Lowrance Link-2 User Manual Download Page 13

Lowrance - Link-2 Installation and Operation Instructions

13

2-1-1 Use of Softkeys in this radio

This radio utilizes ‘softkeys’ where the functionality of each softkey button will change 

depending on the mode the radio is in. The bottom line of the LCD display will indicate 

the function of each softkey located immediately below.

Left softkey (3CH/EXIT) 

3CH

 softkey: 

3CH

 The 

3CH

 softkey is used to initiate a Three Favorite 

Channels scan function.

 

Press to toggle between your favorite 

channels. The  ,  , or    symbol appears on the LCD to show 

which favorite channel is selected. 

 

If you want to scan all three favorite channels, press 

3CH

, then 

immediately press and hold 

SCAN

. 

 

To add a favorite channel for the first time, select that channel 

then hold 

3CH

 to store it in the CH1 location. Repeat the 

procedure to store two more favorite channels in the CH2 and 

CH3 locations respectively. 

 

If you try and add another favorite channel it will overwrite the 

existing CH3. CH1 and CH2 will remain unless you delete them. 

 

To delete a favorite channel, select that channel then hold 

down 

3CH

 until a dialog box appears to prompt the deletion.

EXIT

 softkey: 

EXIT

 The 

EXIT

 softkey is used when navigating menus 

to clear incorrect entries, to exit from a menu without saving 

changes and to back up to the previous screen.

Right softkey (SCAN/ENTER)
SCAN

 softkey: 

SCAN

 The 

SCAN

 softkey is used to initiate a channel scan 

function.

 

Quick press and release for 

Dual Watch

 - scan 

between your current channel and the priority channel in DUAL 

mode.

 

Press and hold down 

SCAN

 for more than 2 seconds to enter 

ALL SCAN

 mode where the priority channel is checked every 

1.5 seconds. 

 

When a signal is received, scanning stops at that channel and 

“R” appears on the screen. If the signal ceases for more than 5 

seconds, the scan restarts.

 

In ALL SCAN mode, you may wish to ‘skip’ a channel because 

it may alway be busy and therefore stops the scan. If you wish 

to ‘skip’ a channel, hold down the left softkey for more than 2 
seconds. 

SKIP

 will appear on the screen and the channel 

will be skipped. To cancel the skip, manually select the skipped 

Summary of Contents for Link-2























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands