Lowrance Link-2 User Manual Download

Page: 62 / 86

Lowrance - Link-2 Installation and Operation Instructions

6-2 Receiving a Distress Call (DISTRESS!)

DISTRESS
UNDEFINED
123456789

►

00:01

An alert sounds when a distress call (DISTRESS!) is received.

1. Press

SILENC

softkey to silence the alert. You do not need to send an

acknowledgement.

2. The radio automatically selects CH16 after 10 seconds if no user intervention, or

press

ACCEPT

softkey to change to CH16 immediately.

3. Press / button to view details of the distress call. Details include the user

MMSI and nature of the emergency (if specified), also the time and the location

(if specified). If the location and time are not specified, these are replaced with

sequences of 9s and 8s respectively.

•

The radio is capable of receiving enhanced LL position data if the vessel transmitting

the distress call is sending this. This provides the position of the distressed vessel to

within 20 m (60 ft).

4. Press PTT to establish voice contact or press EXIT key to quit the DISTRESS RECEIVE

call.

Note:

The call data is stored in the Distress Log and location data (DSC & DSE) sentence

will be output on the NMEA 0183 port for indication on a connected chartplotter / MFD.

6-3 Distress Acknowledgement (DISTRESS ACK) or Distress Relay All

Ships (DISTRESS REL)

1. An alert sounds when a Distress ACK or Distress Relay all ship call is received. Press

SILENC

softkey to silence the alert.

2. The radio automatically selects CH16 after 10 seconds if no user intervention, or

press

ACCEPT

softkey to change to CH16 immediately.

3. Press

◄ / ►

button or rotate the CH knob to view details of the distress call.

Details include the user MMSI and nature of the emergency (if specified), also the

time and the location (if specified). If the location and time are not specified, these

are replaced with sequences of 9s and 8s respectively.

4. Press PTT to make voice contact with the calling vessel. Maintain a listening watch

on CH16 and standby to lend assistance.

•

For a Distress Acknowledgement (DISTRESS ACK) sent from the Search and Rescue

(SAR) authorities of your country, your radio automatically cancels Distress Mode

transmissions and CH16 appears. Press PTT to establish voice contact with the

Search and Rescue (SAR) authority.

Summary of Contents for Link-2























































































Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands

Lowrance Link-2, User Manual

Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands