Lowrance Link-2 Page 55 User Manual Download

Page: 55 / 86

Lowrance - Link-2 Installation and Operation Instructions

5-10-4 Start tracking

Start tracking as follows:

START TRACK

►

YES

DSC CALL

SENT CALL

▲

LL REQUEST

►

TRACK BUDD

▼

TRACK BUDDY

►

START TRACK

SET BUDDY

TRACKLIST

▼

SET TRACK

KATHY 1 OFF
SAM 2 ON
BUDDY #3 3 OFF

1. Press CALL/MENU to enter DSC mode, then select TRACK BUDDY.

2. Select START TRACK, then YES. The START TRACK display changes to STOP TRACK. To

stop tracking at any time, just press YES.

3. As soon as you start tracking, an LL Request is sent immediately on CH70 and your

radio; and it waits for acknowledgement of the (first) buddy’s LL position to be

displayed on your radio screen.

Each of the selected buddies is polled for their LL positions at regular time intervals.

When information is received, a friendly ring tone sounds and the position is shown on

the screen. Pressing any key cancels the screen.

The position that is received is not stored in your radio’s Log, but is broadcast over NMEA

0183 to the chartplotters. Press any key to acknowledge, or wait for the automatic 20

second timeout.

Note:

The Link-2 is capable of receiving and displaying the LL position data at normal or

enhanced resolution.

5-11 Make a DSC test call (DSC TEST)

You can test your radio’s DSC operation by sending a DSC TEST CALL to a Buddy or other

station equipped with a DSC radio.

Note:

You should not use a routine DSC call to test your radio and you should minimize

the use of the safety channel for test purposes.

5-11-1 Send a DSC TEST call

1. Select DSC CALL then DSC TEST.

2. Select the buddy you want to call from your buddy list, or Select MANUAL NEW then

enter the MMSI of the individual you want to call.

3. Press ENTER to accept the selection.

4. Press ENTER again to SEND the call. Channel 70 is selected automatically and the

symbol is shown on the LCD while the call is being sent.

5. The radio waits for an acknowledgement (WAIT). If the call is acknowledged a

notification is displayed.

Summary of Contents for Link-2























































































Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands

Lowrance Link-2, User Manual

Search results

Summary of Contents for Link-2

Reviews:

Related manuals for Link-2

Brands by name

Popular brands