Lowrance iFINDER Explorer Page 54 Operating Instructions Manual Download

Page: 54 / 140

Satellite Status Page (left) with Satellite Status Menu (right).

Status Menu

The Satellite Status Menu allows you to set GPS options such as Track
Smoothing, GPS Auto Search and Use Indoors.

Digital Data Page

This page provides detailed information on the position of the
iFINDER's cursor. From this page, you can determine your latitude,
longitude, altitude, travel time, speed and other useful information
about your position and trip.

1. To get to the Digital Data Page press

PAGES

repeatedly until it ap-

pears on the screen.

2. To change the information in the top window, use the

↓

↑

keys to

scroll through one of three options: Position, Altimeter History and
Pressure History.

3. To get to Digital Data Page menu press

MENU

when the Digital Data

page is on the main display.

Digital Data page (left) with the Digital Data Menu (right).

Digital Data Menu

The Digital Data Menu allows you to change units of measure and to
customize the digital data boxes with the data most important to you.

Summary of Contents for iFINDER Explorer












































































































































Search results

Summary of Contents for iFINDER Explorer

Reviews:

Related manuals for iFINDER Explorer

Brands by name

Popular brands

Lowrance iFINDER Explorer, Operating Instructions Manual

Search results

Summary of Contents for iFINDER Explorer

Reviews:

Related manuals for iFINDER Explorer

Brands by name

Popular brands