Lowrance iFINDER Explorer Operating Instructions Manual Download Page 109

Page: 109 / 140

101

Main Menu (left); Trails Menu (center); Trail Options menu (right).

General Trail Options

To access the Trails Menu

1. Press

MENU

↓

RAILS

ENT

Delete All Trails

Once you are in the Trails menu, you can remove all trails from mem-
ory by pressing

→

ELETE

ENT

←

ENT

Update Trail Option

This menu lets you change the way trail updates occur.

Trail Options menu with Update Criteria selected (left). Distance was

chosen from the Update Criteria menu (right), which launched the

Update Distance box.

WARNING:

If the Update Trail box is unchecked, automatic trail
creation and recording will be turned

off

in both Ad-

vanced and Easy modes. You will have to turn it on again
to record trails. The default setting is on.

From the Trails menu, use

←

→

to select

RAIL

PTIONS

and press

ENT

Highlight

PDATE

RAIL

and

press

ENT

to turn it on (check) or turn it off

(uncheck).

Summary of Contents for iFINDER Explorer












































































































































Search results

Summary of Contents for iFINDER Explorer

Reviews:

Lowrance iFINDER Explorer, Operating Instructions Manual, Page: 109 / 140

Search results

Summary of Contents for iFINDER Explorer

Reviews: