Lowrance iFINDER Explorer Page 101 Operating Instructions Manual Download

Page: 101 / 140

To display a Navionics chart:

1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)

2. From the Map Page, press

MENU

↓

ATA

ENT

↓

HOICE

ENT

. Use

↑

↓

to select the

Map Name

, then press

ENT

EXIT

Map Choice highlighted (left). Lowrance selected from Map Choice

menu (right).

WARNING:

You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.

Pop-up Help

Help is available for most all menu items on this unit. Selecting a menu
item and leaving it highlighted for a few seconds, a pop-up message ap-
pears, describing the function of the item. This feature is on by default.

To set up Popup Help,

press

MENU

↓

YSTEM

ETUP

ENT

↓

OPUP

ELP

. With the option highlighted, press

ENT

to turn it on

(check) or turn it off (uncheck). After the option is set, press

EXIT

to return to the page display.

Summary of Contents for iFINDER Explorer












































































































































Search results

Summary of Contents for iFINDER Explorer

Reviews:

Related manuals for iFINDER Explorer

Brands by name

Popular brands

Lowrance iFINDER Explorer, Operating Instructions Manual

Search results

Summary of Contents for iFINDER Explorer

Reviews:

Related manuals for iFINDER Explorer

Brands by name

Popular brands