Lowrance iFINDER Explorer Page 106 Operating Instructions Manual Download

Page: 106 / 140

Software Info command in Easy Mode (left). Advanced

mode (center). The Software Info screen (right).

The command works the same in both Easy and Advanced Mode, but
Software Information is accessed differently in each mode.

Easy Mode

1. Press

MENU

↓

OFTWARE

NFO

ENT

2. Read the information displayed on the screen.

3. To return to the main page display, press

EXIT

Advanced Mode

1. Press

MENU

↓

YSTEM

ETUP

ENT

↓

OFTWARE

NFO

ENT

2. Read the information displayed on the screen.

3. To return to the main page display, press

EXIT

repeatedly.

Sounds and Alarm Sound Styles

Key strokes and alarm sounds can be adjusted in the Sounds menu.
The Sounds menu works the same in both Easy and Advanced Mode,
but is accessed differently in each mode:

Easy Mode

, press

MENU

↓

OUNDS

ENT

Advanced Mode

, press

MENU

↓

OUNDS

ENT

Sounds selected on main menu in Easy Mode (left). Sounds highlighted

on main menu in Advanced mode (center). Sounds menu (right).

Summary of Contents for iFINDER Explorer












































































































































Search results

Summary of Contents for iFINDER Explorer

Reviews:

Related manuals for iFINDER Explorer

Brands by name

Popular brands

Lowrance iFINDER Explorer, Operating Instructions Manual

Search results

Summary of Contents for iFINDER Explorer

Reviews:

Related manuals for iFINDER Explorer

Brands by name

Popular brands