longitude coordinates. A waypoint is used to mark a position you
later may want to return to. Two or more waypoints can also be
combined to create a route.
Saving waypoints
Press and hold the Cursor/Waypoint key to save a new waypoint.
•
With cursor inactive, the waypoint is placed at the vessel's
position
•
With cursor active, the waypoint is placed at the cursor position
Moving a waypoint
1.
Press the Cursor/Waypoint key.
2.
Maneuver the cursor so it is over the waypoint
3.
Activate the menu and select the waypoint in the menu. The
menu expands to include the move option.
4.
Select the move option in the menu
5.
Use the Arrow keys to move the waypoint to the new position
6.
Press the Menu/Enter key.
The waypoint is saved at the new position.
Edit a waypoint
You can edit all information about a waypoint from the Edit
Waypoint dialog.
The dialog is activated by positioning the cursor over the waypoint,
selecting the waypoint in the menu, and then the Edit menu option.
The dialog can also be accessed by activating the Waypoints,
Routes, Trails dialog on the tools panel on the Home page. Select
the Waypoints tab and then the waypoint you want to edit.
Waypoints, Routes, and Trails
| Hook² Series Operator Manual
39
