Lotus EMIRA 2022 Owner'S Handbook Manual Download

Page: 212 / 252

212

3. Ensure the engine is switched off in

the doner vehicle and make sure that

the two vehicles do not touch each

other.

4. Open the positive jump-starting

point terminal cover.

5. Connect one clamp of the red jumper

cable to the donor vehicle’s battery’s

red po terminal post.

6. Connect the other clamp of the red

jumper cable onto the Lotus vehicle’s

red po jump-starting point.

7. Connect one clamp of the black

jumper to the donor battery’s

negative – terminal post.

8. Connect the other clamp of the black

jumper cable onto the Lotus vehicle’s

negative -battery post (4).

9. Check that the jumper cable clamps

are securely attached to avoid sparks

during the starting attempt.

10. Start the engine of the donor car

and allow it to run a few minutes at

a fast idle speed.

11. Start the Lotus vehicle engine.
12. Remove the jumper cables in the

reverse order of fitment, (black

negative -, then red po).

VEHICLE CARE

13. Make sure that neither of the black

negative - jumper cable clamps

comes into contact with either the

donor or Lotus vehicle’s positive

jump-starting point, donor vehicle’s

battery positive terminal or the

clamp connected to the red jump

lead.

Have the cause of the discharged

battery investigated and rectified and

trickle charge the battery as shown on

page 211.

WARNING:

Ensure that tools or

metal watches or jewellery do not

contact the battery terminals or

electrically live components.

WARNING:

It is most important

that the correct procedure is fol-

lowed to reduce the risk of dam-

age to either vehicle’s electrical

system and most importantly, to

minimise the danger of a spark in-

duced battery explosion.

WARNING:

Check that the donor

vehicle also has a 12V negative

earth electrical system.

WARNING:

Use only jumper cables

of adequate thickness, fitted with

completely insulated clamps. The

cables must be long enough to

allow that neither vehicles nor

cables touch each other.

WARNING:

Follow all warnings and

instructions of the jumper cable

manufacturer.

WARNING:

When connecting the

jumper cables, keep them away

from moving engine parts.

WARNING:

The two vehicles must

not contact each other, or current

could flow as soon as the positive

terminals are connected.

Summary of Contents for EMIRA 2022





























































































































































































































































Search results

Summary of Contents for EMIRA 2022

Reviews:

Related manuals for EMIRA 2022

Brands by name

Popular brands

Lotus EMIRA 2022, Owner'S Handbook Manual

Search results

Summary of Contents for EMIRA 2022

Reviews:

Related manuals for EMIRA 2022

Brands by name

Popular brands