Lotus EMIRA 2022, Owner'S Handbook Manual

Page: 86 / 252

86
Notification Messages
A message is shown in the driver’s dis-
play if cruise control is not unavailable
or has been cancelled, see page 63.
Increasing Vehicle Speed
Vehicle road speed can be temporarily
increased using the accelerator pedal,
when the accelerator pedal is released,
the previously set vehicle road speed is
resumed.
Increasing Cruising Speed
With cruise control active:
Press and hold down the
button or press repeatedly,
the vehicle road speed will
increase continuously or in 1
mph increments.
Or
Accelerate to required speed
and press the button.
Decreasing Cruising Speed
With cruise control active:
Press and hold down the
button or press repeatedly,
vehicle road speed will
decrease continuously or in
0.6 mph increments.
Manual Deactivation
Press the button. The
OFF
symbol and set speed will
illuminate white again in the
driver’s display. Cruise control
has now returned to standby
mode and the last set vehicle
road speed is stored for reuse
if required.
Automatic Deactivation
– Vehicle road speed decreases below
20 mph (32 km/h).
– Vehicle road speed increases above
130 mph approximately.
– Pressing the brake pedal.
– Traction Control or Electronic
Stability Control is activated.
– Track mode is selected.
– The vehicle speed is higher than the
set speed for longer than 1 minute.
The
OFF
symbol and set speed will illumi-
nate white again in the driver’s display.
Cruise control returns to standby mode
and the last set vehicle road speed is
stored for reuse if required.
Resuming Cruise Control
With cruise control deactivated (but not
turned off):
Press the button to
reactivate. The cruise control
set speed and
OFF
symbol in
the driver display will change
colour from white to green
and the vehicle road speed will
return to the previously stored
set speed.
WARNING: Only resume cruise
control if you want to return to,
and are aware of, the set speed.
To Turn Off
From Standby Mode:
Press or button to display
another option.
DRIVER ASSISTANCE