2. Click
, then click
EVENT
. Click the
ALARM OUTPUT
tab on the side panel.
To control alarm output devices:
•
To enable alarm output devices, select
Auto
or
Manual
for each device you would like to ena-
ble. Select
Stop
to disable the alarm output device. Click
Apply
to save changes.
•
To manually disable activated alarm devices, click
OK
next to
Alarm Release
.
16.4.14
Configuring Pre-Recording
The system can pre-record video when motion detection events occur. This will ensure that the
system records the entire event when motion is detected. By default, the system pre-records 4 sec-
onds of video every time motion is detected.
NOTE
Ensure you have set your preferences for motion detection (see 12
To configure pre-recording:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
#LX400113; r. 3.0/56326/56332; en-US
89