2. Click
, then click
EVENT
. Click the
LOCAL ALARM
tab on the side panel.
3. Select the alarm input port the device is connected to.
4. Check
Enable
.
5. Select
NO (Normal Open)
or
NC (Normal Close)
depending on the type of alarm input de-
vice you have.
6. Click
Setup
next to
Schedule
to configure the times of the week when the selected device will
be activated. By default, the device will be activated 24/7.
•
Click or click-and-drag along each of the red timelines to quickly add or remove time from
each day’s schedule in 30–minute segments.
•
Click
beside 2 or more days to link schedules (
). This allows you to quickly
change multiple schedules at once.
•
To make fine adjustments to a schedule, click
Set
. This will allow you to set exact start and
end times for a schedule.
•
Click
OK
when finished.
#LX400113; r. 3.0/56326/56332; en-US
87