Lorex LHV16212, Instruction Manual, Page: 80 / 176

Using the Main Menu 15
To reset the system to factory default settings:
1. From the Main Menu, click and then click Setting>Default .
2. Check the menus you would like to reset to default settings.
3. Click
OK .
15.3.23 Upgrading Firmware from USB
Firmware upgrades provide enhanced functionality. The system will automatically check
for firmware upgrades if it is connected to the Internet. The system also supports firm-
ware upgrades from a USB thumb drive (not included). Firmware updates may be posted
on a model’s product page, or provided by customer support via email
To upgrade firmware from a USB drive:
1. Download the firmware upgrade from www.lorextechnology.com (if available), or re-
quest it from customer support.
2. Extract the firmware file and copy the firmware to a blank USB flash drive.
NOTE
Do not have any folders on the USB flash drive—just the firmware file.
3. Insert the USB flash drive to a USB port on the system.
4. Right-click and then click Main Menu . Click >Setting>Upgrade .
5. Click Start .
6. Select the firmware file on the USB drive and click Start .
WARNING
DO NOT POWER OFF THE SYSTEM OR DISCONNECT THE POWER CABLE DURING FIRM-
WARE INSTALLATION
#LX400060; r.30328/35049; en-US 70