Lorex LHV16212, Instruction Manual, Page: 60 / 176

Using the Main Menu 15
To access the Record Info menu:
• From the Main Menu, click and then select Info>Record Info .
15.2.3 Version
The Version sub-menu allows you to view information about the current firmware installed
on the system.
To access the Version menu:
• From the Main Menu, click and then click Info>Version .
15.2.4 Alarm Status
The Alarm Status menu shows you a display of system alarms. Activated alarms are
highlighted in white. Additional info is shown, such as channels that are currently detect-
ing motion.
The following alarms are shown in the Alarm Status menu:
• No HDD : No hard drive is detected.
• Disk Error : Hard drive error detected.
• Disk Full : Hard drive is full.
• Net Disconnection : System is not connected to the network.
• IP Conflict : More than one device on the network is using the same IP address.
• MAC Conflict : More than one device on the network is using the same MAC address.
• Video Loss : Shows disconnected channels.
• Motion : Shows channels with active motion alarms.
To access the Alarm Status menu:
• From the Main Menu, click and then select Alarm Status .
#LX400060; r.30328/35049; en-US 50