Lorex LHV16212, Instruction Manual, Page: 166 / 176

Connecting a PTZ Camera (LHV2000 Series) 21
21.2.3 Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click to open the aux menu.
2. Click the Pattern tab.
3. Under Pattern , enter the pattern you would like to configure.
4. Move the camera into the desired start position and click Begin .
5. Move the camera into the desired end position and click End .
To run a pattern:
• Under No. , select the number of the pattern you would like to go to and click .
21.2.4 Auto Scan
An auto scan automatically cycles between a left and right point.
To create a new auto scan:
1. Click to open the aux menu.
2. Click the Border tab.
3. Move the camera into the desired left position and click Left .
4. Move the camera into the desired right position and click Right .
To run an auto scan:
• Click .
#LX400060; r.30328/35049; en-US 156