Lorex LHV16212, Instruction Manual, Page: 158 / 176

LHV2000 Series Hard Drive Installation 20
3. Remove the rear panel screws (4x). Remove the cover.
4. Place the hard drive over one of the sets of screw slots on the bottom of the system
and then slide the hard drive into place. The SATA connectors on the hard drive
should face the center of the unit.
5. Turn the system over carefully. Tighten the hard drive screws (4x) to secure the hard
drive.
CAUTION
Hold the hard drive in place when turning the system over to prevent damage to the system.
6. Connect the SATA power and data cable to the hard drive.
#LX400060; r.30328/35049; en-US 148