110
Remote Viewing Using Internet Explorer
2
Check
Still Image Attachment
to include a snapshot of the camera with email notifications.
3
Under
Relay SMTP
, select
Default
to use Lorex’s email server (recommended),
Gmail
,
Yahoo
,
Hotmail
, or
Custom
to use a custom email server. Follow the instructions below based on
your selection.
To use Lorex’s email server (Default; recommended):
1
Configure the following:
•
Username:
Enter the sender email address. This can be any address of your choice.
•
Email:
Check
to enable receiver addresses. Enter up to 5 email addresses to receive
email notifications.
•
Interval:
Enter the interval the DVR waits before sending a new email notification.
NOTE:
The DVR will only send 1 email attachment per event, and the interval is only reset when
the event ends.
2
Click
Save
to save your changes.
To use a Gmail, Yahoo, or Hotmail account:
1
Configure the following:
•
Username:
Enter the sender email address. Note that you only enter the account user name
here, not the email domain. For example, if your email account is
, just
enter
tomsmith
.
•
Password:
Enter the password for the sender email account.
•
Email:
Check
to enable receiver addresses. Enter up to 5 email addresses to receive
email notifications.
•
Interval:
Enter the interval the DVR waits before sending a new email notification.
NOTE:
The DVR will only send 1 email attachment per event, and the interval is only reset when
the event ends.
2
Click
Save
to save your changes.
To use a custom email server:
1
Click
Relay SMTP
and select
Custom
. Enter the
server address
in the next field and click
Save & Exit
to confirm.
2
Under
SMTP Port
, enter the
server SMTP port number
and click
Save & Exit
to confirm.
3
Configure the following:
•
Username:
Enter the sender email address.
•
Password:
Enter the password for the sender email account.
•
Email:
Check
to enable receiver addresses. Enter up to 5 email addresses to receive
email notifications.
•
Interval:
Enter the interval the DVR waits before sending a new email notification.
NOTE:
The DVR will only send 1 email attachment per event, and the interval is only reset when
the event ends.
4
Click
Save
to save your changes.
