105
Remote Viewing Using Internet Explorer
•
Camera ID:
Enter the camera ID.
•
Baud Rate:
Select the camera Baud Rate.
•
Duration:
Select the amount of time the camera will remain on presets during Tours before
switching to the next preset.
3
Under
Tour Setup
, select the order of presets that will be used for Tour 1 and Tour 2.
4
Click
Save
to save changes.
Time Tab
Configure NTP, Daylight Savings Time (DST), and Auto Reboot settings for the DVR.
To configure NTP:
1
Check Time Server
Setup to enable NTP
Check
Time Server Setup
to enable NTP.
2
Under
Server Type
, select
NTP
(default).
3
Click
Save
.
To configure Daylight Saving Time settings:
1
Configure the following:
•
Time Zone:
Select your time zone.
•
Daylight Saving Time:
Select
On
to enable or
Off
to disable.
•
Start Time:
Select the starting time for Daylight Savings Time.
•
End Time:
Select the ending time for Daylight Savings Time.
2
Click
Save
to save your changes.
To configure Auto Reboot settings:
1
Under
Auto Reboot
, select
On
to enable or
Off
to disable.
2
If you select
On
, select the time you would like the Auto Reboot to occur under
Time (Hour)
and the day you would like the Auto Reboot to occur under
Repeat
.