Lorex LH030 ECO BLACKBOX3 SERIES, Instruction Manual

Page: 33 / 172

Setting the Date and Time 10
To enable automatic DST adjustments:
1. Click the DST Setup button.
2. Configure the following:
• Daylight Saving Time : Select Enable .
• Time Offset : Select the number of hours the system should move forward or backward when DST
occurs.
• Daylight Saving Time Mode : Select Week or Date . This allows you to select whether DST should
begin and end at the beginning of the week or on a specific date.
• Start Time, End Time : Enter when DST starts and ends.
3. Click Apply to save your settings.
10.2 Using a NTP Server to set your System Time
A NTP (Network Time Protocol) server syncs your system time with an online time server.
Lorex provides a free NTP service that allows your DVR to automatically update the time
for Daylight Savings Time.
Note
A constant Internet connection is required to use the NTP feature.
To enable NTP:
1. Right-click to open the Menu Bar and click the Main Menu button ( ).
#LX400008; r. 2.0/12067/12067; en-US
23