Lorex LH030 ECO BLACKBOX3 SERIES Instruction Manual Download Page 124

Page: 124 / 172

Mobile Apps: Accessing your DVR Using a Mobile Device

18.4

Android

Use the

Lorex Eco Stratus

application to connect to your DVR on an Android smartphone

or tablet.

Note

The instructions below may differ depending on the model of your Android device.

Prerequisites

• Connect your DVR to your router using an Ethernet cable.
•

Make sure to upgrade your DVR to the latest firmware version.

You must have the

latest DVR firmware and mobile apps to connect to the DVR over the Internet.

Note

For the latest list of supported apps and devices, visit

www.lorextechnology.com/support

18.4.1

Connecting to Your System Using Lorex Eco Stratus

1. Install

Lorex Eco Stratus

from the Google Play Store.

Note

For support on downloading or installing Android apps, consult your Android device’s instruction
manual or the manufacturer’s support site.

2. Tap the Lorex Eco Stratus icon (

) to open the app.

3. Tap

Device Manager

4. Tap

Add

#LX400008; r. 2.0/12067/12067; en-US

114

Summary of Contents for LH030 ECO BLACKBOX3 SERIES













































































































































































Search results

Summary of Contents for LH030 ECO BLACKBOX3 SERIES

Reviews:

Related manuals for LH030 ECO BLACKBOX3 SERIES

Brands by name

Popular brands

Lorex LH030 ECO BLACKBOX3 SERIES, Instruction Manual

Search results

Summary of Contents for LH030 ECO BLACKBOX3 SERIES

Reviews:

Related manuals for LH030 ECO BLACKBOX3 SERIES

Brands by name

Popular brands