Using the PC/Mac Client Software
17
17.31
Configuring Event Settings
The Event Settings tab allows you to configure how the system behaves when a system
event occurs (e.g. hard drive error, video loss). This is useful if you want your DVR to notify
you if there is a potential system problem.
To configure the system event settings:
1. Click the
Remote Setting
tab, and click
Advanced>Events
.
2. Configure the following:
•
Event Type
: Configure the type of event that triggers the system to send an alert.
•
Enable
: Select
Enable
to activate the system to notify you if an event occurs.
•
Buzzer
: Select
OFF
to enable/disable the system buzzer or select the duration of
the system buzzer after an event occurs.
•
Show Message
: Select the checkbox to enable the system to display a warning
message when an event occurs.
•
Send Email
: Select the checkbox to enable email notifications. Email notification
must be enabled.
•
Alarm Out
: Select
Enable
for the system to trigger alarm out devices when an
event occurs (alarm devices required; not included).
•
Latch Time
: Configure the system latch time after an event occurs.
3. Click
Save
to save changes.
#LX400008; r. 2.0/12067/12067; en-US
94
Summary of Contents for LH030 ECO BLACKBOX3 SERIES
