Lorenz MAGNUM PLUS User Manual Download Page 90

Page: 90 / 124

User Manual

C-Voice

AVAILABLE ONLY IF THE CHARTPLOTTER IS CONNECTED TO THE

VOICE NAVIGATION SYSTEM

The chart plotter has two different vocal modes, Navigation and Echosounder. According to what

mode is selected the messages spoken from the chart plotter are different.

'MENU' +

"BASIC SETTINGS" + 'ENTER' + "C-VOICE" + 'ENTER'

C-Weather Service

C-Weather Service is an innovative meteorological forecasting system with the ability to visualize the

weather forecast, overlaying it on cartography.

'MENU' + "C-WEATHER" + 'ENTER'

Date (simulation)

Sets the date of the simulated fix.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "DATE" + 'ENTER'

Date Format

Sets you preferred date between MM-DD-YY (month-day-year) and DD-MM-YY (day-month-year).

The default setting is MM-DD-YY.

''MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' + "DATE FORMAT" + 'ENTER'

Datum

The Latitude and Longitude lines printed on any map are based on certain models of the shape of the

earth: these models are called Datum or Coordinate Systems. There are many different Datum in use,

each one gives different Lat/Lon positions for an identical point on the surface of the earth.

Dead Reckoning

Enables (On) or disables (Off0 the Dead Reckoning. The default setting is Off.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "DEAD RECKONING" +

'ENTER'

Default

Indicates a value or a setting which is used if the user has not defined a particular value. You can modify

this value using the menu settings.

Delete (file)

Deletes file from User C-CARD.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' + "DELETE" + 'ENTER'

Delete route

To delete the selected route.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "DELETE ROUTE" +

'ENTER' + "YES" + 'ENTER'

Delete (Track)

To clear the stored track.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DELETE" + 'ENTER' +

"YES" + 'ENTER'

Delete Selection (Track)

To clear the selected track.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DELETE SELECTION"

+ 'ENTER'

Depth (Unit)

Sets the depth units among Ft = Feet, FM = Fathoms and Mt = Meters. The default setting is Ft.

'MENU' +

"BASIC SETTINGS" + 'ENTER' + "DEPTH" + 'ENTER'

Depth Alarm

Turns On/Off the Depth Alarm. The default setting is Off.

Summary of Contents for MAGNUM PLUS





























































































































Search results

Summary of Contents for MAGNUM PLUS

Reviews:

Brands by name

Popular brands

Lorenz MAGNUM PLUS, User Manual

Search results

Summary of Contents for MAGNUM PLUS

Reviews:

Brands by name

Popular brands