manualshive.com logo in svg

Lorenz MAGNUM PLUS, User Manual

Share
Download
Lorenz MAGNUM PLUS User Manual Download Page 57

59

User Manual

4.2 USING MARKS & EVENTS

You may place a Mark, as it is called, at your cursor position, while Event is

created at your vessel position.

4.2.1 MARKS

You may tag a location on the chart with a Mark symbol and number, which

you can record for later use. Every time you place the cursor on a Mark the follow-

ing functions are available.

4.2.1.1

Adding Mark

ONLY

 

ON

 MAGNUM P

LUS

Select Advanced Mode + 'ENTER' + "MARK" + 'ENTER'

or

:

'M

ARK

' (if it is present)

ONLY

 

ON

 MAGNUM P

RO

'MARK'

The new Mark appears on your cursor position. An info window containing

Mark name, symbol and Latitude/Longitude is shown.

4.2.1.2

Deleting Mark

Select Advanced Mode + Adding  Mark  or  Place cursor on  Mark

Press 'ENTER'. Select "DELETE" and press 'ENTER': the Mark remains

on the screen shaded until the next screen is redrawn.

Note 

If  you try to delete a Mark that belongs to many routes, the chart plotter emits three beeps and on

the screen a Warning message appears. If you want to delete the Mark, press 'ENTER'.

4.2.1.3

Goto

Place cursor on  Mark

Press 'DEST': a circle encloses the Mark symbol. A straight line is shown on

the screen connecting the Target with the ship's position. When the Target is placed,

all navigation data are referred to this Target.

4.2.1.4

Moving Mark

Select Advanced Mode + Adding  Mark  or  Place cursor on  Mark

Press 'ENTER'. Select "MOVE" and press 'ENTER'. By moving the cursor

with the cursor key, a dotted line connecting the Mark with the new position is shown:

Summary of Contents for MAGNUM PLUS





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands