Lorenz MAGNUM PLUS, User Manual

Page: 29 / 124

31 User Manual
Fig. 3.3.1 - Navigation to a single destination
On the screen is shown a straight line connecting the Target (called DEST)
with the ship's position and an information window with Target position, that dis-
appears when the cursor is moved from the Target. When the Target is placed, all
navigation data are referred to this Target.
Note
When the chart plotter is turned Off, the Target does not remain in memory.
3.3.2 TIME TO GO
When the Target is set the TTG value is displayed in the Graphic Data page
(see Fig. 3.1.5):
'<PAGE>' to select Graphic Data page
Note
If SOG value is less than 1.0 knots or the BRG is greater than 90 degrees, the TTG value is not
displayed.
3.3.3 DELETING TARGET
Place cursor on Target icon, press 'CLEAR': the symbol identifies Target dis-
appears from the screen.
Otherwise (when the cursor is placed in a generic position on the chart)
press 'DEST'. A window appears to advise that the Destination is present: select the
item "STOP" and press 'ENTER', the symbol identifies Target disappears from the
screen.
Note
If you select the "START" item and press 'ENTER', the Target icon is moved on the new cursor
position.