Loopcomm LP-7617, User Manual

Page: 71 / 113

71/113
3. Security
3.1 Auth.\ Encry. Setting – WEP/TKIP/AES
Figure 3-1 Auth.\Encry. Settings

Authentication Type: There are 7 authentication modes supported by RaUI. They
are Open, Shared, WPA and WPA-PSK, WPA2 and WPA2-PSK.

Encryption Type: For open and shared authentication mode, the available
encryption types are none and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK
authentication mode, the encryption type supports both TKIP and AES.

8021X: This is introduced in the topic of Section 3-2 .

Pre-shared Key: This is the shared key between the AP and STA. If operating in
WPA-PSK and WPA2-PSK authentication mode, this field must be filled with a
key between 8 and 32 characters in length.

WEP Key: Only valid when using WEP encryption algorithm. The key must match
the AP's key. There are several formats to enter the keys.
1.
Hexadecimal - 40bits: 10 Hex characters.
2.
Hexadecimal - 128bits: 32Hex characters.
3.
ASCII - 40bits: 5 ASCII characters.
4.
ASCII - 128bits: 13 ASCII characters.
3.2 802.1x Setting
802.1x is used for authentication of the "WPA" and "WPA2" certificate by the server.
Authentication type: