Loopcomm LP-7617, User Manual

Page: 52 / 113

52/113
0x0100 Keypad

Device Password ID: Indicates the method or identifies the specific password that
the selected Registrar intends to use. APs in PBC mode must indicate 0x0004
within two-minute Walk Time.
Value Description
0x0000 Default (PIN)
0x0001 User-specified
0x0002 Rekey
0x0003 Display
0x0004 PushButton (PBC)
0x0005 Registrar-specified
0x0006-0x000F Reserved

Selected Registrar: Indicates if the user has recently activated a Registrar to add an
Enrollee. The values are "TRUE" and "FALSE".

State: The current configuration state on AP. The values are "Unconfigured” and
"Configured".

Version: WPS specified version.

AP Setup Locked: Indicates if the AP has entered a setup locked state.

UUID-E: The universally unique identifier (UUID) element generated by the
Enrollee. This is a 16 byte value.

RF Bands: Indicates all the RF bands available on the AP. A dual-band AP must
provide it. The values are "2.4GHz” and "5GHz".
2.7.3 Example to Add to Registrar Using PIN Method
The user obtains a device password (PIN Code) from the STA and enters the
password into the Registrar. Both the Enrollee and the Registrar use PIN Config
method for the configuration setup. The following image outlines the process.