45
THIS MANUAL IS PROPRIETY OF
ECOWIND by LOMBARDINI
- ALL FORMS OF REPRODUCTION, PARTIAL OR OTHERWISE, IS STRICTLY PROHIBITED
G
B
Fig. 73
Fig. 75
Fig. 74
Fig. 76
G
MIN 100 mm
ATTENTION! ! !
The fuel intake pipe (IN) of the suction pipe (P) must be connected to the safety cock (R) (fig. 73)
and to the coupling IN on the Power Unit (C).
NON-OBSERVANCE OF THIS STEP COULD PREVENT THE SYSTEM FROM FUNCTIONING! ! !
3 -
ASSEMBLY AND INSTALLATION
Suction pipe (P)
Tank (S)
Step Description
4
Cut the metal suction pipe to the appropriate size as in figure 73.
Step Description
5
Attach the suction pipe
P
to the tank
S
using the supplied self-threading screws, placing the rubber gasket
G
between
the two (fig. 74-75).
Step Description
6
*
For tank with cylindrical shape, we suggest to use 2
rubber gaskets
5
fig 70
Step Description
7
Connect the suction pipe
P
to the Power Unit
PW
, via
the supplied rubber hose and metal clamps (fig. 76)
.
IN
OUT
OUT
IN
FUEL LINE
Panel Power Unit (C)
ON/OFF cock (R)
