29
THIS MANUAL IS PROPRIETY OF
ECOWIND by LOMBARDINI
- ALL FORMS OF REPRODUCTION, PARTIAL OR OTHERWISE, IS STRICTLY PROHIBITED
G
B
Fig. 42
Fig. 43
50 mm
30 mm
Ø 34 mm
Apertura ( K )
Fig. 44
Fig. 45
3 -
ASSEMBLY AND INSTALLATION
3
Make the eye on plastic cover condenser
CC
for
crossing pipes gas
G6
,
G8
and wiring cable
CE
with
measurements reported in fig. 42-43
Air shroud ( Cc)
Electric fan (V)
Follow the procedure described below using a
34 mm diameter hollow mill fig. 44 and make a hole conforming to the
measurements shown in fig. 42
Cut out the strip from the casing, removing it towards the outside, to obtain the opening
K
(fig. 43-45).
NB
:
Operation required only for install pipes, side to condenser Gas
C
like fig. 40÷41
