Resetting the Logger
UTREL30-WiFi User Guide
77
Resetting the Logger
You can reset a UTREL30-WiFi back to its original
READY
state. Once reset, recording
can be
When performing this procedure all recordings and statistics stored in the logger
are irrevocably deleted and cannot be recovered. Please ensure your data has
been saved!
All configuration settings in the logger, including Wireless and Network settings,
are retained.
The logger will NOT connect to LogTag
®
Online until it has been started using
the
START
/CLEAR/STOP
button.
For this process to work, the logger must be
STOPPED
.
Press and hold the
START
/CLEAR/STOP
button. The
READY
symbol will turn on.
When the
STOPPED
symbol turns off, release the
button within 2 seconds. The logger is now ready to
be started again. Follow the normal starting
procedure (
Starting the Logger on page 48
).
If the button is released while
STOPPED
is still , or you wait until the
READY
symbol
disappears, the display shows
STOPPED
again, and the logger remains stopped. This
means, the data from the previous trip is still accessible.
The ability to reset a logger is enabled or disabled in the
tab when
configuring the UTREL30-WiFi via LogTag
®
Analyzer.
