Preparing a UTREL30-WiFi for first use
UTREL30-WiFi User Guide
13
Preparing a UTREL30-WiFi for first use
Before your UTREL30-WiFi can record temperature data and upload readings to
LogTag
®
Online you need to configure it for logging, connect it to the local wireless
network and register it in LogTag
®
Online. This can be completed via the
LogTag
®
Mobile app on-site, or in your office, using a PC connected to the internet.
Which method you use depends on your infrastructure, and since each method requires
different steps, you may have to do things in a different order.
Regardless of which of the following methods you use, please make sure you have
following information before you start this process:
l
Your wireless network name (the network SSID)
l
Your wireless network password (WiFi password), or your user name and password
if you are connecting to a network which requires enterprise authentication
1
l
Your LogTag
®
Online account name (typically your email address)
l
Your LogTag
®
Online sign-in password
l
The name of the team to which you want to register the logger, if you are part of
more than one team
The flowchart
can assist in choosing the right method. If in doubt, you
can always configure the unit using LogTag
®
Analyzer in combination with the
LogTag
®
Online Connection Wizard.
Once you have established from the flowchart which steps are required, please read the
corresponding paragraphs later in this section. You can click the flowchart's elements to
navigate directly to the section you need.
1
Your IT network administrator will advise you of the details you require to connect
