Preparing a UTREL30-WiFi for first use
UTREL30-WiFi User Guide
22
The logger is unconfigured
An unconfigured UTREL30-WiFi logger is delivered to you hibernated (i.e. in a state of
low power consumption), and pressing the
REVIEW
/MARK
button shows:
and then
If your logger is unconfigured, read the next few pages, where you will find information
how to confiugure your logger so it
l
starts and records temperature values;
l
connects to the local WiFi network;
l
connects to your LogTag
®
Online cloud account;
l
can print PDF reports with the right information; and
l
triggers and reports.
This is done using LogTag
®
Analyzer software, which can also be used for downloading
and analyzing data, if you do not wish to connect the logger to LogTag
®
Online LogTag
®
Analyzer includes the LogTag
®
Online Connection Wizard, which will allow you to set
wireless and network settings and register the UTREL30-WiFi against your LogTag
®
Online account:
l
Start the LogTag
®
Analyzer software.
l
Remove the protective cap from the logger's USB socket and plug the Micro USB
end of the cable into the socket. Plug the other end of the cable into a USB socket
on your computer and wait for the drivers to be installed.
l
From the
LogTag
menu click
Configure
; LogTag
®
Analyzer will display the
configuration settings currently stored in your UTREL30-WiFi for reviewing or
editing.
