Preparing a UTREL30-WiFi for first use
UTREL30-WiFi User Guide
23
Standard Configuration Settings
The standard configuration is similar to those of other LogTag
®
logger products and
includes settings such as
User ID
,
start method
,
pre-start recording
,
logging interval
and
duration
,
start delay
, and
password
.
Figure 3:
Standard configuration parameters for a UTREL30-WiFi
Adjust the settings as required. For detailed information about each parameter please
read the section about
Configuring a LogTag
®
for logging
in LogTag
®
Analyzer’s User
Guide or press F1 for help.
In this section you also decide which channels the UTREL30-WiFi will record. Select
CH1
only
or
CH2 only
if you only wish to record temperatures measured by a single probe
(plugged into the corresponding socket marked CH1 or CH2) , or select
Both
for
recording both probes.
