Logicube F-FALCON-SA User Manual Download Page 82

Page: 82 / 168

TYPES OF OPERATIONS

Logicube Forensic Falcon™ User’s Manual

Select

NTFS

to format using the NT file

system (NTFS).



Encryption –

Select

to format the

drive with encryption. The drive will be
formatted with the EXT4 file system or
NT file system (NTFS) and encrypted
with the AES-256 algorithm.

For more information on encrypted
Destination drives, please see

Chapter 8: Drive Encryption and
Decryption

6.0.3.3 Case Info

The Case Info setting allows users to enter
some information about the case. This is

optional and is not required to start a Wipe operation.

Information entered here will appear in the logs. More
information on the Case Info screen can be found in

Section

5.0.3.1

Tap any of the boxes and an on-screen keyboard will appear
allowing information to be entered. After entering the

Summary of Contents for F-FALCON-SA









































































































































































Search results

Summary of Contents for F-FALCON-SA

Reviews:

Related manuals for F-FALCON-SA

Brands by name

Popular brands

Logicube F-FALCON-SA, User Manual

Search results

Summary of Contents for F-FALCON-SA

Reviews:

Related manuals for F-FALCON-SA

Brands by name

Popular brands