Logicube F-FALCON-SA User Manual Download Page 51

Page: 51 / 168

IMAGING

Logicube Forensic Falcon™ User’s Manual

The

(More Info)

icon displays more information on the drive. The drive

details window will appear showing information about the drive.

5.0.3 Settings

Tap the

Settings

icon to change the image settings. Depending

on what Mode was selected (Drive to Drive, Drive to File, File

to File, or File to Drive), different screens will appear.



Case Info –

Found in all 4 modes.



HPA/DCO/Trim –

Found in Drive to Drive and Drive to File modes (Trim

is available only in Drive to Drive).



Error Handling –

Found in Drive to Drive and Drive to File modes.



Clone Method Settings –

Found in Drive to Drive mode.



File Image Method Settings –

Found in Drive to File mode.



Filter Settings –

Found in File to File mode.



Root Directory –

Found in File to File mode.



Output Format –

Found in File to File mode.



Hash/Verification Method –

Found in Drive to Drive, Drive to File, and

File to File modes.



Verify Hash –

Found in File to Drive mode.

5.0.3.1 Case Info

Case Info is a common setting available in all modes. This screen
allows users to enter information about the case. This is
optional and is not required to start an imaging operation.

Information entered here will appear in the logs. In addition,
some forensic analysis software can import the information

Summary of Contents for F-FALCON-SA









































































































































































Search results

Summary of Contents for F-FALCON-SA

Reviews:

Related manuals for F-FALCON-SA

Brands by name

Popular brands

Logicube F-FALCON-SA, User Manual

Search results

Summary of Contents for F-FALCON-SA

Reviews:

Related manuals for F-FALCON-SA

Brands by name

Popular brands