TYPES OF OPERATIONS
Logicube Forensic Falcon™ User’s Manual
92
Load –
Loads the selected profile/configuration.
The Falcon will boot with the
profile/configuration that has an asterisk (*) next
to the name.
User Profiles/Configurations can be copied from
one Falcon to another using the Command Line
Interface. Profiles/Configurations can also be
backed up to a USB flash drive and restored if
needed. More information including detailed
step-by-step instructions can be found in
Profiles/configurations allow users to create different profiles or
configurations. The profile/configuration can then be saved.
When a profile/configuration is loaded using the
Load
icon, the
Falcon will load that configuration during its boot process.
For example, if the user wants the Falcon to always boot up
with the default imaging mode to
Drive to File
with the setting
of
E01
with a segment size of
2GB
:
1.
Turn the Falcon off then back on. This will reset all
settings to its default configuration. This is an important
step to help ensure only the changes desired will be the
changes saved.
2.
Go to the
Imaging
screen and set the
Mode
to ‘Drive to
File.
3.
In the
Settings
, set the image to
E01
and set the
segment size to
2GB
.
4.
In the
System Settings
, go to
User
Profiles/Configurations
and tap the
New
icon.
5.
Type a name for this profile. For example, E01-2GB and
tap the
OK
icon. The profile name should appear on the
screen.
