62
2.3. REMOVING AND FITTING THE OVEN DOOR
Open the oven door completely, insert the anti-rotation device (A) in the
hook of the hinge rods. Hold the oven door by the sides and slowly close it
until you can feel a certain resistance; simultaneausly lift the door and
force it towards its closed position in order to slide it out by freeing the
hinge lock from the kitchen’s body. To refit the door repeat the above
instructions in reverse making sure the hinge lock is correctly fitted.
For the CURVA models insert an anti-rotation hinge in the appropriate
holes. Hold the door by the sides and slowly close it until you can feel a
certain resistance; now, while forcing the door closed, lift it in order to
slide it out by freeing the hinge lock from the kitchen. To refit the door
repeat the above instructions in reverse making sure the hinge lock is
correctly fitted.
2.4. REPLACING THE LIGHT BULB
Turn the cooker off at the mains before replacing the bulb.
Open the oven door, remove the protective glass cover, replace the light bulb (CAUTION: it
must be resistant up to 300°C) and replace the glass protection.
2.5. GLASS COVER (only for certain models)
To assemble the cover put the hinges into the special spaces in the wall protection of the
cooker fitting into the existing slits (A), lift the cover up in vertical position (B) and push down
until the hinges go to their place (C).
To disassemble the cover make the contrary of the above-described operation.
A
B
C
3. USING THE COOKER
WARNINGS:
- If the burner flames accidentally go out, turn off the KNOB and wait for at least one minute
before igniting.
- Using a gas cooker produces heat and humidity in the room where it is installed. Ensure the
room is well ventilated by keeping all the natural air vents open or by installing an extraction
hood with flue pipe.
- Intensive or extensive use of the cooker could may require supplementary ventilation e.g.
opening a window, or more efficient ventilation e.g. increasing the capacity of the mechanic
ventilation, if installed.
-
