71
COOKING PROGRAMMER
HOUR ADJUSTMENT
In order to adjust the hour on the clock, push 4 times the knob until the icon “CLOCK” blinks. To
increase or decrease the time, turn the knob clockwise or anticlockwise, the minute hand will
move in one-minute intervals. After 10 second from the last regulation the timer will set up
automatically.
Once the time has been set, you can proceed with manual cooking.
END COOKING PROGRAMMATION
Programming the end cooking time allows starting and finishing the cooking in an automatic
way according to the programmed hour.
To program the end of the cooking, briefly push the knob twice until the “STOP” icon flashes.
To increase or decrease the cooking time turn the knob clockwise or anticlockwise until the
desired time is reached.
The flashing of the “STOP” icon continues for 10 seconds from the last setting, if by this time the
programming isn’t made, the function ends and the hands will return to display the time.
Push the knob to confirm the program (at least 2 minutes) so the cooking can start. To display
the selected program push the knob quickly.
At the end of the cooking the “STOP” icon will flash and the alarm will beep. After 1 minute the
alarm will be disabled, but the “STOP” icon will keep on flashing until the knob is pushed.
To stop the program before the settled time, push the knob for 3 seconds: the program will be
deleted and the timer will return to the manual cooking set up.
START COOKING DIGITAL PROGRAMMER
Programming the start cooking time allows to automatically start and stop the cooking.
To program the start cooking time, briefly push the knob until the “START” icon flashes.
To increase or decrease the start cooking time, turn the knob clockwise or anticlockwise.
The flashing of the “START” icon continues for 10 seconds after the last setting.
If by this time the programming isn’t made, the function ends and the hands will return to display
the time.
If the knob is pressed the cooking start time is set (at least 1 minute) (the “START” icon is lit on
and steady). The next step is the setting of the end cooking time (the “STOP” icon starts
flashing).
To program the end cooking time follow the procedure below.
The two icons “START” and “STOP” will remain on to indicate successful programming.
TIMER PROGRAMMING
The timer programming allows to set a simple alarm at the end of a programmed time without
starting up the cooking.
