54
fixed to the ends of the slits on the cooker pedestal. Their height can be adjusted in order to line
the cooker up with other units. Ensure that the cooker is perfectly stable. Fit the burners, the
flame diffusers and the grids into their seats on the hob (see paragraph 3.9). Some models
come with rubber pads that prevent the steel hob surface from being scratched. Fit them to the
central pan grid made of chrome-plated rod.
LEG FITTING INSTRUCTIONS
Figure1. When fitting the washer to the leg bolt make sure the
burr on the washer is facing upward away from the leg top.
Figure 2. Leg assembly with washer fitted correctly. The lower
part of the leg will unscrew to adjust the height and level of the
cooker.
Figure 3. Leg insert cut out on base of oven. To fit the legs to
the appliance lie the cooker flat on its back and fit all four legs.
DO NOT fit legs to the cooker by tilting the appliance, doing so
may damage the leg assembly.
Figure 4. Insert washer fitted to top of leg into base of cooker
and slide the leg along the channel.
Figure5. Screw the leg up tight so the oven base is clamped
between the washer and the top of the leg. Once all four legs
have been fitted lift cooker onto the legs taking care to distribute
the weight evenly onto all four legs at the same time.
DO NOT tip the appliance onto its legs, always lift the appliance
onto its legs. (This will require two people)
Summary of Contents for 8022389009704
Page 85: ......
