OPERATING ELEMENTS
49
Dialog Window
–
Interfaces (I/O)
Tap the I/O icon
, to open the dialog window.
Here you can
▪
Perform a diagnosis of the interface:
The status of the inputs on the left and the outputs on the right are displayed, by
indicator lights. The numbers next to it refer to the pin numbers of the
interface XS10.
▪
Activate or deactivate external inputs with the respective slider (i/e).
If an equivalent internal signal is present, it is automatically deactivated if it is set to
extern
(e. g. Start/Stop).
With the slide switch
vel.
(velocity) you can select whether the setpoint for the volume flow
rate corresponds to the manual input or is to come from external interface. Please note that
the interface processes a voltage range of 0-10 V. This corresponds to 0-100 % of the pump
speed
–
100 % comply with the maximum permissible value.
The external setpoint is only possible in conjunction with the interface. If it is deactivated,
the system automatically uses the manual settings as setpoints.
Dialog Window
–
Calibration
After opening the calibration settings
the following window appears:
Summary of Contents for EQ RC24 RD
